Customers frequently viewed

Trenz Electronic GmbH

PCIe FMC Carrier with AMD Virtex-7 FPGA, 8 Lane PCIe GEN2, SODIMM SDRAM (TEC0330-05)

AMD Virtex-7 FPGA module XC7VX330T-2FFG1157C DDR3 SO-DIMM Socket, 256-Mbit (32-MByte) Quad SPI Flash FMC HPC, 8 lane PCIe Gen 2 capable


Item number VAR-827003252

Manufacturer Product Number: TEC0330-05

Taric/custom code: 84715000


Available for immediate dispatch: 0

Expected dispatch delay beyond available stock: up to 2 weeks

Item located in and dispatched from: Riedlingen, Germany


EUR 3,149.00 *
Content 1 piece


Log in and get better prices. Or contact us and request B2B status.

* Excl. VAT excl. Shipping

The predecessor of this article is TEC0330-04. All changes are in the Product Change Notification (PCN).

Note: Carrier without pads for conduction cooling!

The Trenz Electronic TEC0330 is a PCI Express form factor card (PCIe 2.0 or higher) integrating the AMD Virtex-7 XC7VX330T FPGA chip. This high-end FPGA card is designed for maximum system performance and intended for use in applications with high demands on system throughput. There is a SO-DIMM socket on the board for standard DDR3 SDRAM extension memory module.

The TEC0330 features HPC (High Pin Count) ANSI/VITA 57.1 compatible FMC interface connector for standard I/O Mezzanine modules. Other interface connectors found on-board include JTAG for accessing FPGA and on-board System Controller CPLD, and also connector with 5 high-speed I/O differential signaling pairs.

The TEC0330 FPGA board is intended to be used as add-on card in a PCIe 2.0 or higher capable host systems, it can not be used as a stand-alone device.

Key Features

  • AMD Virtex-7 FPGA module XC7VX330T-2FFG1157C (commercial temperature range)
  • PCI Express 2.0 x8 card with maximum throughput of 4 GB/s
  • FMC High Pin Count (HPC) connector
  • 8 FPGA MGT lanes available on PCIe interface
  • DDR3 SODIMM SDRAM socket
  • 256-Mbit (32-MByte) Quad SPI Flash memory (for configuration and operation) accessible through:
    • FPGA
    • JTAG port (SPI indirect, bus width x4)
  • External clock input via SMA coaxial connector
  • 28 GTH transceivers, each with up to 13.1 Gbit/s data transmission rate
  • FPGA configuration through:
    • JTAG connector
    • SPI Flash memory
  • Programmable quad clock generator
  • TI LMK04828B ultra low-noise JESD204B compliant clock jitter cleaner
  • On-board high-efficiency DC-DC converters
  • Up to 202 FPGA I/O pins available on FMC connector (up to 101 LVDS pairs possible)
  • System management and power sequencing
  • AES bit-stream encryption
  • eFUSE bit-stream encryption

Other assembly options for cost or performance optimization plus high volume prices available on request.

Development Support

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Scope of Delivery

  • 1 x TEC0330-05 Trenz Electronic PCIe FMC Carrier with AMD Virtex-7 330T FPGA

Additional Information

Item ID 102780
Condition New
Model TEC0330-05
Manufacturer Trenz Electronic GmbH
Manufacturing country Germany
Content 1 piece
Weight 500 g
Net weight 500 g
Customs tariff number 84715000