Digilent Inc.

JTAG SMT2 NC Surface-Mount Programming Module

Kleine, komplette All-in-One-JTAG Programmierung / Debugging-Lösung für Xilinx FPGAs


Numero di variazione (MEPA): VAR-827000837

Codice produttore: 410-308

Codice doganale: 84718090


Disponibile per la spedizione immediata: 0

Tempo di elaborazione 3 giorni. Per gli ordini con un valore netto totale inferiore a 70 euro, verrà applicata una tassa di elaborazione di 15 euro.

Articolo situato in e spedito da: Riedlingen, Germania


47,00 EUR *
Contenuto 1
Effettua il login e ottieni prezzi migliori. Oppure contattateci e richiedete lo stato B2B..

* IVA Excl. escl. Costi di spedizione

The JTAG-SMT2 NC features all of the same features as the JTAG-SMT2, but without a USB connector pre-mounted on the board. This allows users of this programming solution to mount the board anywhere in their own design, as opposed to the edge-mounting recommended for the JTAG-SMT2.

The JTAG-SMT2-NC uses a 3.3V main power supply and a separate Vref supply to drive the JTAG signals. All JTAG signals use high-speed 24mA three-state buffers that allow signal voltages from 1.8V to 5V and bus speeds of up to 30 MBit/sec. The JTAG bus can be shared with other devices, as systems hold JTAG signals at high-impedance, except when actively driven during programming. The SMT2 module is CE-certified and fully compliant with EU RoHS and REACH directives.

Note: This module is not needed for Digilent FPGA boards as our boards are designed with this functionality natively.

Features

  • All the same features as the JTAG-SMT2, but built without the USB connector.
  • Small, complete all-in-one JTAG programming/debugging solution for Xilinx FPGAs
  • Compatible with all Xilinx tools.
  • Compatible with IEEE 1149.7-2009 Class T0 – Class T4 (includes 2-Wire JTAG).
  • GPIO pin allows debugging software to reset the processor core of Xilinx’s Zynq™ platform.
  • Single 3.3V supply.
  • A separate Vref drives JTAG signal voltages; Vref can be any voltage between 1.8V and 5V.
  • High-speed USB2 signals are pinned out for user design that can drive JTAG/SPI bus at up to 30Mbit/sec (frequency settable by user).
  • SPI programming solution (modes 0 and 2 up to 30Mbit/sec, modes 1 and 3 up to 2Mbit/sec).
  • Small form-factor surface-mount module can be directly loaded on target boards.
  • A similar circuit is available as a stand-alone programming cable, the JTAG-HS2.

Scope of Delivery

  • 1 x JTAG-SMT2-NC Surface-Mount Programming Module

References

  • Manufacturer: Digilent Inc.
  • Manufacturer's article name: JTAG-SMT2-NC Surface-Mount Programming Module
  • Manufacturer's article number: 410-308P

Resources

Other Digilent products are available on request.

ID articolo 100725
Condizione
ID della variazione 2271
Modello 410-308
Produttore Digilent Inc.
Paese di produzione
Contenuto 1 undefined
Peso 2 g
Peso netto 2 g