AMD (Xilinx)
Xilinx Artix-7 FPGA AC701 Evaluation Kit
The Artix-7 FPGA AC701 Evaluation Kit features the leading system performance per watt Artix-7 family to get you quickly prototyping for your cost sensitive applications.
Référence de l’article: VAR-827000882
Numéro de produit du fabricant: EK-A7-AC701-G
Code douane: 8471500000
Article situé / expédié de : Riedlingen, Allemagne
This article is distributed only within Germany!
This item is a NCNR product (None Cancelable, None Returnable).
NCNR products are identified by Trenz Electronic GmbH as none cancelable, none returnable, by reason of product type, volume or value.
Customer acknowledges that any orders for NCNR products are legally binding, and are subject to the following conditions:
- Customer may not cancel or reduce orders or reservations for NCNR products without written approval from Trenz Electronic GmbH.
- Customer may not reschedule delivery of orders or reservations for NCNR products without the written approval from Trenz Electronic GmbH.
- Except for returns under applicable warranty, if any, Trenz Electronic GmbH will not accept a return on NCNR products.
The Artix-7 FPGA AC701 Evaluation Kit features the leading system performance per watt Artix-7 family to get you quickly prototyping for your cost sensitive applications. This includes all the basic components of hardware, design tools, IP, and pre-verified reference designs. This also features a targeted reference design enabling high-performance serial connectivity and advanced memory interfacing equipped with a full license for the Northwest Logic DMA engine.
Features
- Optimized for quickly prototyping cost sensitive applications using Artix-7 FPGAs
- Hardware, design tools, IP, and pre-verified reference designs
- Demonstrates a high performance data transfer system using a PCI Express x4 Gen2
- Reference design implemented with Northwest Logic DMA engine attached to a AXI interface
- Advanced memory interface with 1GB DDR3 SODIMM up to 533MHz / 1066Mbps
- Enabling high-performance serial connectivity with GTP ports on FMC, SFP, & SMA
- Supports embedded processing with MicroBlaze, soft 32bit RISC
- Develop networking applications with 10-100-1000 Mbps Ethernet (RGMII)
- Implement Video display applications with HDMI out
- Expand I/O with the FPGA Mezzanine Card (FMC) interface
Hardware
- FPGA: Artix-7 XC7A200T-2FBG676C FPGA
- ROHS compliant AC701 kit including the XC7A200T-2FBG676C FPGA - Configuration
- Onboard JTAG configuration circuitry to enable configuration over USB
- JTAG header provided for use with Xilinx download cables such as the Platform Cable USB II
- Quad SPI Flash: 32MB (256Mb) - Memory
- DDR3 SODIMM 1GB up to 533MHz / 1066Mbps
- Quad SPI Flash: 32MB (256Mb)
- IIC EEPROM: 8Kb
- SD Card Slot - Communication & Networking
- 10/100/1000 Mbps Ethernet (RGMII)
- SFP cage
- GTP port (TX, RX) with four SMA connectors
- UART To USB Bridge
- PCI Express 4-lane edge connector - Display
- HDMI Video output
- LCD display (2x16)
- User LEDs (x4) - Expansion Connectors
- FMC-HPC (Partially Populated) connector
> GTP Transceivers (x2) , 116 single-ended or 58 differential (34 LA & 24 HA) user defined signals
> VADJ can support 1.8V, 2.5V (default), or 3.3V
- PMOD (1x6 0.1" Header) - Clocking
- Fixed Oscillator with differential 200MHz output Used as the “system” clock for the FPGA
- User Programmable (IIC) Differential Oscillator (Range: 10MHz - 810 MHz, 156.250 MHz default)
- Differential SMA clock input
- Differential SMA GTP reference clock input
- Jitter attenuated clock sed to support CPRI/OBSAI applications that perform clock recovery from a user-supplied SFP/SFP+ module - Control & I/O
- User Push Buttons (x5)
- User DIP Switch (4-position)
- SMA User I/O (Diff Pair)
- AMS FAN Header (2 I/O)
- 7 I/O pins available through LCD header - Power
- AC Power adapter (12V) or ATX - Analog
- XADC header
Scope of Delivery
- AC701 evaluation board featuring the XC7A200T-2FBG676C FPGA
- Full seat Vivado Design Suite: Design Edition, Node locked & Device-locked to the Artix-7 XC7A200T FPGA, with 1 year of updates and support
- AMS 101 evaluation card
- Printed Getting Started Guide
- Cables & Power Supply
- 90-day limited warranty
Additional Information
- Manufacturer: Xilinx
- Manufacturer's article name: Xilinx Artix-7 FPGA AC701 Evaluation Kit
- Manufacturer's article number: EK-A7-AC701-G
- Manufacturer product page
- Xilinx Solution Center
- Xilinx User Community Forums
| ID de l’art. | 100762 |
| État | |
| Modèle | EK-A7-AC701-G |
| Fabricant | AMD (Xilinx) |
| Pays de fabrication | Singapour |
| Contenu | 1 pièce |
