Flexible peripheral modules for all your designs

Pmod™ devices are Digilent’s line of small I/O interface boards that offer an ideal way to extend the capabilities of programmable logic and embedded control boards. They allow sensitive signal conditioning circuits and high-power drive circuits to be placed where they are most effective - near sensors and actuators.

Pmod modules communicate with system boards using 6, 8, or 12-pin connectors that can carry multiple digital control signals, including SPI and other serial protocols. Pmod modules allow for more effective designs by routing analog signals and power supplies only where they are needed, and away from digital controller boards.

Overview Pmod BT2

The Pmod BT2 is a powerful peripheral module employing the Roving Networks® RN-42 to create a fully integrated Bluetooth interface. Users can communicate with the chip via UART and can also use the secondary SPI header on the board for updating the RN-42 firmware if needed.

Features

Bluetooth 2.1/2.0/1.2/1.0 compatible
Add wireless capability with this low power, Class 2 Bluetooth radio
Supports HID profile for making accessories such as pointing devices, etc.
Secure communications, 128-bit encryption
Six different modes
Small PCB size for flexible designs 1.5“ × 0.8” (3.8 cm × 2.0 cm)
12-pin Pmod connector with UART interface

Scope of Delivery

1 x Pmod BT2 in a custom antistatic Pmod packaging

Pmod Hardware Compatibility Guide

Digilent's guide about determining hardware compatibility.

References

Manufacturer: Digilent Inc.
Manufacturer's article name: Pmod BT2 - Bluetooth Interface
Manufacturer's article number: 410-214

Resources

Other Digilent products are available on request.

ID de l’art.	100248
État
ID de l'ancien article	1988
Modèle	410-214
Fabricant	Digilent Inc.
Pays de fabrication	Taiwan
Contenu	1 pièce
Poids	23 g
Poids net	23 g

Pmod BT2: Bluetooth Interface