The ZedBoard Advanced Image Processing Kit was built to use the video processing capabilities of the Zynq-7000 AP SoC's tightly coupled ARM processing system and 7-series programmable logic. Included in the bundle is a ZedBoard, an FMC Pcam Adapter, and up to four Pcams to create the ultimate video streaming setup.

Users can take advantage of our project demonstrations to get started:

Eventually, users can develop high speed engines for video processing, advanced video algorithms, video content analysis, processing digital video in real time, intelligent vision solutions, and any embedded vision application.

Digilent products are warranted to be free from manufacturing defects for 30 days from the date of purchase. No other express or implied warranties are provided.

Features

Zedboard Features

Xilinx Zynq-7000 AP SoC XC7Z020-CLG484
Dual-core ARM Cortex-A9
512 MB DDR3
256 MB Quad-SPI Flash
On-board USB-JTAG Programming
10/100/1000 Ethernet
USB OTG 2.0 and USB-UART
Analog Devices ADAU1761 SigmaDSP® Stereo, Low Power, 96 kHz, 24-Bit Audio Codec
Analog Devices ADV7511 High Performance 225 MHz HDMI Transmitter (1080p HDMI, 8-bit VGA, 128x32 OLED)
PS & PL I/O expansion (FMC, Pmod, XADC)

FMC Pcam Adapter Features

Two/Four Pcam system-side connectors
Level translators from MIPI D-PHY to LVDS and LVCMOS
Male FMC LPC connector for digital signals
Compatible with a wide range of VADJ voltages (1.8V – 3.3V)

Pcam 5C Features

5MP color system-on-chip image sensor
15-pin FFC connector for image data
Dual lane MIPI CSI-2 image sensor interface
Supports QSXGA@15Hz, 1080p@30Hz, 720p@60Hz, VGA@90Hz and QVGA@120Hz
Output formats include RAW10, RGB565, CCIR656, YUV422/420, YCbCr422, and JPEG compression*
Standard M12 lens mount for lens interchangeability
Ships with 10 cm cable and factory installed fixed-focus lens
Small PCB size for flexible designs (4.0 cm x 2.5 cm)
1×7 straight 100-mil header for access to auxiliary camera signals
Works with Pcam compatible Digilent development boards

*JPEG compressed output is a feature of the OV5640, but is currently untested on this module

Target Applications

Video analytics
Machine vision
Medical imaging
Video surveillance
Advanced driver assistance systems

Scope of Delivery

The UK adapter is not included in the power supply.

ZedBoard is a complete development kit for Xilinx Zynq-7000 AP SoC
Two Pcam 5C fixed focus color camera modules
FMC Pcam Adapter adds up to four cameras to your Zynq APSoC platform
12 V AC/DC power supply
4 GB SD Card
USB A to micro-B cable
USB Adapter: Male Micro-B to Female Standard-A

Associated Pmods

Overview Pmods by Digilent Inc. sorted after their name, Bus, logic level and specification version.

Pmods are designed to plug directly into Pmod host ports that adhere to the Digilent Pmod Interface Specification. Additionally, the Digilent Pmod Standard lays out guidelines for form factor, communication protocols and access to a target audience through reference manuals, code examples, user guides, and technical support.

Getting started with Digilent Pmod IPs

References

Manufacturer: Digilent Inc.
Manufacturer's article name: ZedBoard Advanced Image Processing Kit, Dual PCAM option
Manufacturer's article number: 471-034

Resources

Product page at Digilent Inc.
Digilent Inc. Support Forum
Further information and product support http://www.zedboard.org/

Other Digilent products are available on request.

ID de l’art.	100395
État
ID de l'ancien article	3047
Modèle	471-034
Fabricant	Digilent Inc.
Pays de fabrication	Taiwan
Contenu	1 pièce
Poids	800 g
Poids net	800 g

ZedBoard Advanced Image Processing Kit - Dual PCAM